Your Isuzu vehicle was built to be dependable and safe. We urge the drivers of Isuzu vehicles to be safety-conscious and "street smart" during all driving situations -- including those that are unexpected.

Familiarizing yourself with the roadside tips found in this section as well as the comprehensive safety information found in your owner's manual will help ensure the safety of you and your passengers.

Parking on Hills

Parking Uphill
Turn your wheels from the curb and toward the centerline of the road.
If the vehicle were to roll backward, it would stop against the curb.

Parking Downhill
Turn your wheels from the road and toward the curb.
If the vehicle were to roll forward, it would stop against the curb.

When there is no curb, turn the wheels from the centerline of the road toward the side of the road.

Jump Starting Your Vehicle

Isuzu vehicles are extremely reliable, but if you're ever faced with a dead battery and are covered by Isuzu's Roadside Assistance, just call (800) 444-0303, toll-free, and we'll be there to help, ASAP.

However, if you can't wait for assistance, below is a step-by-step guide to jump-starting your vehicle. Refer to your owner's manual for illustrative details.

  1. Position the vehicle with the good (charged) battery so that the jump-starting cables will reach. Do not allow the vehicles to touch. Check to see that the bumpers do not touch.
  2. Turn off all electric motors and accessories in both vehicles. Turn off all lights except hazard flashers and lights needed to light up the work area. Turn off the ignition, apply the parking brake firmly, and shift in automatic transmission to "P" (Park) or a manual transmission to "N" (Neutral) in both vehicles.
  3. Jumper-cable connection instructions:
    1. Connect the first jumper cable from the positive "+" (red) terminal on one battery to the positive "+" (red) terminal on the other battery. Never connect "+" (red) to "-" (black) or "-" to "+".
    2. Next, connect one end of the second cable to the grounded negative "-" (black) terminal of the good (charged) battery.
    3. Lastly, connect the other end of the second grounded jumper cable to a solid, stationary, metallic point on the engine of the vehicle with the discharged battery. Make sure it is at a point at least 18 inches (45 cm) away from the battery. Do not connect it to pulleys, fans or other parts that move. Beware of touching hot manifolds, which can cause severe burns. (The mounting brackets for the alternator or the air conditioning compressor generally make a good point for this final ground attachment point. Take care that the jumper cable does not contact moving parts on or near the alternator or compressor.)
  4. Start the engine of the vehicle with the good (charged) battery and run the engine at moderate speed.
  5. Start the engine of the vehicle that has the discharged battery.
  6. Remove the battery cables by reversing the step 3 sequence.
Changing a Flat Tire

Changing a flat tire is probably not your pastime of choice. However, as with any unforeseen occurrence, knowledge is key. If you get a flat tire on a busy highway or freeway, wait for help or use available means to call for help.

Remember, Isuzu's Roadside Assistance comes in handy. If you're covered, just call (800) 444-0303, toll-free, and we'll be there as soon as possible to lend assistance. In safer locations away from the flow of traffic, follow the tire-changing instructions found in your owner's manual. Here are some general guidelines:

  • Be sure you're located in an area where it is safe to change a tire.
  • Turn on the hazard-warning flasher.
  • Put the vehicle in "P" (Park) or, if equipped with a manual transmission, in gear.
  • Set the parking brake firmly.
  • Turn off the ignition.
  • Unload the vehicle of unnecessary or heavy contents.
  • Never use a jack from any other vehicle to lift your vehicle.
  • Never get beneath the vehicle when using the jack.
  • Do not start the engine while the vehicle is on the jack.
  • Make sure the jack is positioned on a level and solid surface.
  • As soon as possible after installing a wheel, have a mechanic tighten the wheel nuts with a torque wrench.
  • Have your flat tire fixed or replaced immediately.
What To Do When Your Engine Overheats

When an engine overheats, it's cause for immediate attention. If you're covered by Isuzu's Roadside Assistance, call toll-free at (800) 444-0303 and we'll come out and help. If that's not an option, you may have to take matters into your own hands.

To determine that your engine is overheating, look for these signs:

  • The engine coolant temperature gauge pointer will move close to the line of "H" or higher.
  • Engine "ping" will become excessive.
  • Loss of engine power will be noticed.
  • Either steam or boiling water will squirt out of the radiator.

If your engine is overheating, follow the procedure in your owner's manual. Here is some general advice:

  • Safely stop the vehicle away from the flow of traffic.
  • Open the hood when no steam or engine coolant can be seen or heard escaping from the engine compartment.
  • Stop the engine and allow the engine and radiator to cool down.
  • Check for a broken belt or a burst hose. If you discover either, you'll need to be towed.
  • If neither has occurred, wait until the radiator is cool enough to touch, then open the cap (with a large rag over the cap, just for safety).
  • Add a 50% coolant / 50% water mixture (or in an emergency, just clean water) to the top, close the cap, start the engine, look for leaks and closely monitor engine temperature.
  • You'll then want to carefully drive to the nearest Isuzu dealer for diagnosis and repair (from Isuzu-trained technicians, of course).
What To Know About Anti-Lock Brakes

Many Isuzu vehicles feature a standard or optional Anti-lock Brake System (ABS). ABS is an advanced electronic braking system that is designed to prevent lockup of the wheels during braking by automatically changing the brake pressure, thus helping to prevent skidding and preserve steering control. Here are some important things you should know about ABS:

  • To use ABS, don't "pump" your brakes. Just hold the pedal down and let ABS work for you.
  • ABS does not activate until the speed of the vehicle reaches 5 mph (8 km/h).
  • At each startup, when the brake pedal is initially pressed, a pulse may be felt in the brake pedal and a "click" sound may be heard as the ABS self-checks.
  • During operation, ABS causes the brake pedal to pulsate, and it may push back against your foot. A pulsating brake pedal may be an indication of a slippery road. At this time, a sticking or popping sound may be heard from the brake system.
  • When the brake is applied while turning corners or driving over sharp drops or rises in the road, it can lead to the activation of ABS.
  • The anti-lock feature is designed to help you maintain steering control during braking, but there could still be some loss of steering control in certain road and weather conditions. Always use common sense in all driving conditions and adhere to posted speed limits.
  • The operation of ABS on gravel, deep snow or bumpy roads, or when using tire chains, may result in a longer stopping distance than for vehicles without an Anti-lock Brake System. Anticipate for this in your driving by maintaining sufficient stopping distances.
Getting The Best Fuel Economy

Take note of these easy driving suggestions on how to go farther with fewer trips to the pump:

  • Avoid fast starts away from lights and stop signs.
  • Whenever possible, take advantage of through streets to avoid traffic lights. Also, pace your driving to avoid unplanned stops. Frequent stop-and-go driving will cut down on your miles per gallon (kilometers per liter).
  • Avoid long idling. Idling engines use fuel too. If you're faced with a delay of more than a few minutes and you're not in traffic, turn off your ignition and start again later.
  • Avoid repetitive, harsh stopping. Harsh stops can also waste fuel; instead of moving the vehicle, the energy is wasted as heat in braking.
  • Properly lubricate your vehicle. A well-lubricated vehicle means less friction between moving parts. Refer to your owner's manual for the proper lubrication intervals.
  • Replace your air cleaner at the proper intervals, which are specified in the maintenance schedule of your owner's manual. Your vehicle gets its power from a mixture of fuel and air, which is taken into the engine through the air cleaner. A dirty air cleaner filter reduces engine performance and can waste fuel.
  • Use the air conditioning only when necessary. When the air conditioning compressor is not on, the reduced engine load can improve fuel economy.
  • Maintain your engine. An engine that is properly maintained will provide better fuel economy than one that is not. One misfiring spark plug will cut fuel economy significantly and will make a difference in the amount of pollution emitted from your vehicle.
  • Lighten your load. Fuel economy is related to the work the engine must do. The heavier the load, the more fuel it takes to run your vehicle. Keep weight to a minimum by removing unnecessary luggage or cargo.
  • Check your tire pressure often and keep your tires inflated to the recommended pressure. Underinflation not only causes needless tire wear but can also waste fuel.
  • Check your wheel alignment. Improper wheel alignment will cause the front tires to roll at an angle that will result in faster tire wear. It takes power to overcome this improper alignment which, in turn, wastes fuel.
  • Switch to 2-wheel drive whenever appropriate. If your vehicle is equipped with Torque-On-Demand® 4-wheel drive, change to the 2H mode position during normal driving using your TOD switch.
What To Know About Airbags

The airbag is formally called a Supplemental Restraint System (SRS) and is designed to be used in conjunction with seat belts. Always wear your seat belt even though your vehicle is equipped with airbags. Your owner's manual contains a full list of airbag-related dos and don'ts. Here are some general tips:

  • Drivers should sit as far back as possible while still maintaining control of the vehicle. The front passenger should also sit back as far as possible. Airbags deploy with great force; sitting too close can cause great injury.
  • Children 12 and under are most safely seated in the back-seats, as they can be seriously injured by inflation of the front-passenger's airbag.
  • Airbags are designed to deploy only once. In the event they deploy, the airbag system will require new parts, which may be obtained and installed at your local Isuzu dealer.
  • It is not recommended that you conduct any airbag repairs yourself. If you suspect trouble with your airbag system, consult your local Isuzu dealer.